Automated Screw Thread Quality Checking
The requirement for strict specification and acceptance of all automotive parts and components has greatly increased in recent years. Screw thread inspection is no exception. The common practice of eddy current probes, lasers, proximity sensors or vision systems are only partly successful as they only inform you of the presence of a thread, not if it's correct or within tolerance. The unique low-cost SMAC solution enables you to automatically check the following screw thread parameters:
- Oversize or undersized threads
- Cross threads
- Thread depth
- No threads
- Mis-located threads
- Thread pitch
- Shallow or blocked hole
Automatically checks for:
- Minor diameter out of spec
- Major diameter out of spec
- Pitch diameter out of spec
- Pitch
- Foreign objects (e.g. broken tap, swarf etc)
- Double tapped thread
- Thread depth
- Missing threads
- Cylindericity
An optional Thread Check Graphical User Interface (GUI) is also available. Graphical User Interface, SMAC-Motion, provides a simple and straightforward way to quickly configure motion parameters of a variety of SMAC single/dual axis actuators and controllers.
Oil Pan Thread Checking Oil pan threads were checked using a plug thread gauge coupled directly to the end of the shaft of the SMAC actuator. |
|
Wheel Bearing Casting |
Fuel Valve
Five SMAC LAR55s were used to check threads and adjust valve flow rate at the same time.
Similar Applications
- Water pump casting
- Cam shaft
- Steering housing casting
- Axles and axle covers
- Fuel injector nozzle
- and more